CUT X PRO is heavy duty high performance environment friendly ,long life semi synthetic metal working fluid suitable for moderate to heavy duty machining and grinding operations on all ferrous and nonferrous metals. It is formulated with high stability emulsifiers, ensure that emulsion remain stable at severe operating conditions and gives long life to emulsion leads to less top up. Besides these it has incorporated EP additives, corrosion inhibitors and biocides.
Excellent rust protection-Corrosion inhibitor package
protects the job and machine from rusting.
Stable long life translucent emulsion-No oil separation, less top up.
Exceptional lubricity and cooling properties.
Reduces wheel loading and dressing frequency.
Reduces machine downtime.
No hazardous materials like chromates, Nitrites, and Sulphates.
No Health hazards.
TYPICAL PHYSICAL CHARACTERISTICS
Type of emulsion
Density @ 20°C
ASTM D 1298
Viscosity @ 40°C
ASTM D 445
Typical 58 mm2/s
PH of 5% emulsion in D/W
Water content % wt.
ASTM D 95
Mineral oil content
Flash Point COC°C
ASTM D 92
Corrosion Test for 24 hrs. in
200 ppm water
Factor Refractometer (1:20)
Emulsion stability for 24 hrs.
in 400 ppm hard water
Chlorine Content % wt.
COOLANT MANAGEMENT SYSTEM
To improve the efficiency and life of coolant.
System Cleaning – Before charging the fresh emulsion, make sure that emulsion tank, pipe line and system is clean.
Coolants preparation – Always add coolant into water slowly with agitation. Prepare correct concentration of emulsion as recommended.
Coolant Maintenance – Regularly check emulsion concentration ( if required top up) pH value and odor to make sure that emulsion is in good condition , correct dosage, no deterioration.
HEALTH & SAFETY
CUT X PRO is unlikely to present any significant health or safety hazard when properly used in the recommended application and good standards of industrial and personal hygiene are maintained.